Pre-Crusher
Compactors are designed to reduce waste volume and to destroy
product to prevent reuse. Pre-Crushers offer maximum compaction
ratios for Transfer Stations operations.
SPECIFICATIONS
Overall
Length:
263"
Charge
Box Capacity:
5 cu. yd.
WASTEC
Rating:
4.52
Clear
Top Opening:
93"
x 58"
Cycle
Time - Precrusher Mode:
72 seconds
Cycle
Time - Compactor Mode:
44 seconds
Operating
Pressure - Normal:
1850 psi
Operating
Pressure - Maximum:
2250 psi
Ram Face
Pressure - Maximum:
61.5 psi
Ram
Force - Normal:
104,600
lbs.
Ram
Force - Maximum:
127,200
lbs.
Ram
Penetration:
17"
Electric
Motor:
30 hp
Pump
Capacity:
63 gpm
Hi-Lo
Tank
Capacity:
180 gal.
Hydraulic
Cylinder - Bore:
(two) -
6"
Hydraulic
Cylinder - Stroke:
120"
Hydraulic
Cylinder - Rod:
4"
Precrush
Gate Cylinder - Bore:
3 1/2"
Precrush
Gate Cylinder - Stroke:
41 1/2"
Precrush
Gate Cylinder - Rod:
2"
Construction
- Floor:
3/4"
plate
Construction
- Sides:
1/2"
plate
Construction
- Breaker Bar:
10"
x 8" x 2" fabricated angle
Construction
- Ram Face:
3/4"
plate
Construction
- Ram Top:
3/8"
plate
Construction - Ram
Sides:
3/8" plate
Construction - Ram
Bottom:
1/2" AR plate
Construction - Precrusher
Face:
3/4" plate
Unit Weight:
20,100 lbs.
Overall Width:
73"
Discharge Opening
Height:
43 1/2"
Discharge Opening
Width:
61"
Presshead Height:
34 1/2"
Chamber Depth:
39"
Compactor Frame
Height:
55"
Description of Operation:
In pre-crusher mode,
the pre-crusher gate starts in the down position, blocking the
end of the charge chamber from the refuse container. As the
compactor ram moves forward, it compacts the refuse against
the gate to 100% compaction force. The ram then retracts enough
to relieve pressure on the gate and the gate raises to it's
upper position. The ram then continues its forward travel, compacting
the crushed refuse into the container.
